Release 0.2.3

Bump the manifest to 0.2.3 for the stale-room policy: unusable room
sensors are left out with weights re-normalized, and an opt-in checkbox
keeps a stale sensor's last value for up to 24 hours. 0.2.2 was never
deployed, so the changelog marks it as such and the 0.2.3 notes point
0.2.1 users at both entries. ROADMAP and AUDIT record the decision and
the open control-design questions (minimum weight coverage, outdoor
temperature outages).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

AUDIT.md

@@ -206,3 +206,22 @@ resets the relay's `last_changed`, so continuity cannot be verified anyway).
 **Verification.** `sh scripts/check.sh` passes in both test environments (pip
 check, 65 offline tests, 18 HA Core tests, compilation, package/translation/changelog
 checks, `git diff --check`). The offline tests also pass on Python 3.9.6.
+
+
+## 0.2.3 — stale-room policy
+
+Decided by the user: pausing everything because one room sensor is unusable is
+not acceptable for future control. An unusable room is now left out and the other
+rooms' weights re-normalized; an opt-in checkbox keeps a stale sensor's last value
+for sensors that report only on change. Two safeguards were added: the keep-last
+option stops after 24 hours without a report, and Status exposes `excluded_rooms`
+and `weight_coverage`, so a forecast based on a small share of the comfort weight
+is visible.
+
+Open for the control design: a minimum `weight_coverage` below which the MPC must
+not decide, and the outdoor-temperature outage policy (still pauses). Simulated
+two-hour bedroom outage: the other room kept learning (7 → 25 samples, previously
+frozen at 7) and the bedroom resumed one poll after reporting again.
+
+**Verification.** `sh scripts/check.sh` passes for HA 2025.12.0 and 2026.2.3 (69
+offline tests, 18 HA Core tests). The offline tests also pass on Python 3.9.6.

CHANGELOG.md

@@ -2,7 +2,38 @@
 
 Engineering findings and test evidence behind each change are in [AUDIT.md](AUDIT.md).
 
-## 0.2.2 — 2026-10-26
+## 0.2.3 — 2026-10-26
+
+A stale or failed room sensor no longer pauses the whole integration. Still
+**observation-only**. Upgrading from 0.2.1 (0.2.2 was not deployed): follow the
+0.2.2 upgrade notes below as well.
+
+### Changed
+
+- A room sensor that is stale, unavailable, missing or invalid is now **left out**
+  instead of pausing everything: the weighted temperature, learning and forecasts
+  continue with the other rooms, whose comfort weights are re-normalized. Learning
+  and forecasts pause only if no room is usable, or if the relay, thermostat or
+  outdoor temperature is missing. Readiness considers only the rooms used.
+
+### Added
+
+- Checkbox **Keep using the last value of a room sensor that stopped reporting**
+  (setup and Configure, default off), for sensors that report only when the value
+  changes. A stale sensor's last value is then still used, for up to 24 hours
+  without a report. Unavailable or invalid sensors are always left out.
+- Status attributes `excluded_rooms` and `weight_coverage` (share of the total
+  comfort weight covered by the rooms used), and a per-room `used` flag in
+  `input_quality`.
+
+### Upgrade notes
+
+- The new checkbox appears in **Configure**; existing installations start with it
+  off. If a room is often listed in `excluded_rooms` while its temperature is
+  steady, either raise that room's report-age limit or turn the checkbox on.
+- Rollback to 0.2.2 or 0.2.1 is safe; older versions ignore the new setting.
+
+## 0.2.2 — 2026-10-26 (not deployed)
 
 Reliability release (Milestone 0). Still **observation-only**: the integration never
 calls the relay, the thermostat or any other service. No new options or UI text;

README.md

@@ -1,4 +1,4 @@
-# Heating MPC 0.2.2 — custom integration for Home Assistant OS
+# Heating MPC 0.2.3 — custom integration for Home Assistant OS
 
 **Experimental, observation-only (shadow mode).** It **never** changes the Generic Thermostat, the physical relay, the boiler's setpoint, `heat/off`, or Comfort/Away/Sleep. No Docker add-on, MQTT or InfluxDB connection is needed.
 

ROADMAP.md

@@ -10,7 +10,7 @@ Success means predictable comfort, understandable decisions, safe operation and
 
 ## Current baseline — v0.2.1
 
-> **Current release: 0.2.2** — Milestone 0 reliability work on top of this
+> **Current release: 0.2.3** — Milestone 0 reliability work on top of this
 > baseline; see [CHANGELOG.md](CHANGELOG.md). The lists below describe 0.2.1.
 
 **Implemented (experimental):**
@@ -165,12 +165,15 @@ Only after the Milestone 3 gate has been satisfied:
 
 Items 1–3 of the original backlog are done (see AUDIT.md and CHANGELOG.md 0.2.2).
 
-1. **HAOS acceptance of 0.2.2 by the user:** install, restart, options reload, room
+1. **HAOS acceptance of 0.2.3 by the user:** install, restart, options reload, room
-   removal and re-adding, manual heat/off, a missing sensor, uninstall on a
+   removal and re-adding, manual heat/off, a stale and an unavailable room sensor
-   disposable entry; confirm Generic Thermostat behavior is unchanged.
+   (with the keep-last-value checkbox off and on), uninstall on a disposable
-2. Finish Milestone 0: decide the stale-room policy (pause all rooms, as now, or
+   entry; confirm Generic Thermostat behavior is unchanged.
-   keep learning healthy rooms); committed rollback/migration fixtures; failed-fit
+2. Finish Milestone 0: committed rollback/migration fixtures; failed-fit counters;
-   counters; lint/type checks; remote CI run.
+   lint/type checks; remote CI run. Stale-room policy decided in 0.2.3 (leave the
+   room out, or optionally keep its last value for up to 24 hours). Before live
+   control, decide a minimum `weight_coverage` and the outdoor-temperature outage
+   policy, which still pauses.
 3. Milestone 1: record forecasts with their input snapshot and evaluate them
    walk-forward at 15/30/60/120 minutes against persistence, replaying the actual
    relay sequence; then expose trajectories for a dashboard.

custom_components/heating_mpc/manifest.json

@@ -9,5 +9,5 @@
   "iot_class": "local_polling",
   "requirements": [],
   "single_config_entry": true,
-  "version": "0.2.2"
+  "version": "0.2.3"
 }